|
document references:
features:
- 16 ports 10/100Mbps TX Auto-Negotiation Ethernet Switch
- Full/Half-Duplex capability on every TX port
- Supports TP Interface Auto MDIX funcition for auto TX/RX swap
- Automatic Source MAC Address Learning and Aging
- Support up to total 4096 MAC address
- Support up to 2Mbit buffers
- Supports Store & Forward architecture and performs forwarding and filtering
- Broadcast Storming Filter function
- IEEE802.3x Flow control for Full-duplex operation
- Back Pressure function for Half-duplex operation
- Runt and CRCFiltering Eliminates erroneous packets to optimize the network
- Support to handle up to 1522 bytes packet
- LED indicators for simple diagnostics and management
- Internal power supply
- Plug and play
introduction:
The 16 port Switch are designed to allow simultaneous transmission
of multiple packets via an internal high-speed data channel. This
means that it can partition a network more efficiently than bridges
or routers in most environments. This 16 port Switch is a highly
reliable network Switch and is the ideal device for bridging
Ethernet to Fast Ethernet workgroups or networks. Simple and
cost-effective, the 16 port Switch supports IEEE802.3 10Base-TX
Ethernet and IEEE802.3u 100Base-TX Fast Ethernet. The 16 port
Switch is therefore fast being recognized as one of the most
important building blocks for today networking technology.
Specification:
Model Number
ESW-1016A
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
Network Media
100Base-TX - UTP/STP category 5 cable
10Base-TX - UTP/STP category 3 or 5 cable
Connector
Shield RJ-45 port for 10/100Mbps TX
LED indicators
System - Power LEDIndividual port - link/activity LEDs
Dimension
432 (L) x 220 (W) x 44 (H) mm
Temperature
Operating 0 - 50C
Storage -20 - 70C
Humidity
Operating 10%~90%
Storage 5%~95%
Device Input Power
9 VDC
Registrations
FCC Part 15 Class A, CE
|
