|
document references:
features:
- Complies with the IEEE802.3 10Base-T Ethernet
- 8 ports 10/100Mbps TX Auto-Negotiation Ethernet Switch
- Full/Half-Duplex capability on every TX port
- Supports TP Interface Auto MDIX funcition for auto TX/RX swap
- Automatic Source MAC Address Learning and Aging
- Supports Store & Forward architecture and performs forwarding and filtering
- Broadcast Storming Filter function
- IEEE802.3x Flow control for Full-duplex operation
- Back Pressure function for Half-duplex operation
- Runt and CRCFiltering Eliminates erroneous packets to optimize the network
- Support to handle up to 1522 bytes packet
- LED indicators for simple diagnostics and management
- Plug and play
introduction:
The 8 port Switch are designed to allow simultaneous transmission
of multiple packets via an internal high-speed data channel. This
means that it can partition a network more efficiently than bridges
or routers in most environments. This 8 port Switch is a highly
reliable network Switch and is the ideal device for bridging Ethernet
to Fast Ethernet workgroups or networks. Simple and cost-effective,
the 8 port Switch supports IEEE802.3 10Base-TX Ethernet and
IEEE802.3u 100Base-TX Fast Ethernet. The 8 port Switch is therefore
fast being recognized as one of the most important building blocks
for today networking technology.
Specification:
Model Number
ESW-1008A
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
Network Media
100Base-TX - UTP/STP category 5 cable
10Base-TX - UTP/STP category 3 or 5 cable
Connector
Shield RJ-45 port for 10/100Mbps TX
LED indicators
System - Power LED
Individual port - link/activity LEDs
Dimension
159 (L) x 100 (W) x 28 (H) mm
Temperature
Operating 0-50C
Storage -20-70C
Humidity
Operating 10%~90%
Storage 5%~95%
Input Power
9 VDC
Registrations
FCC Part 15 Class A, CE
|
