|
document references:
features:
- Complies with the IEEE802.3 10Base-T Ethernet and IEEE802.3u 100Base-TX FastEthernet Standards
- 5 ports 10/100Mbps TX Auto-Negotiation Ethernet Switch
- Full/Half-Duplex capability on every TX port
- Supports TP Interface Auto MDIX funcition for auto TX/RX swap
- Automatic Source MAC Address Learning and Aging
- Supports Store & Forward architecture and performs forwarding and filtering
- Broadcast Storming Filter function
- IEEE802.3x Flow control for Full-duplex operation
- Back Pressure function for Half-duplex operation
- Runt and CRCFiltering Eliminates erroneous packets to optimize the network
- Support to handle up to 1522 bytes packet
- LED indicators for simple diagnostics and management
- Plug and play
introduction:
The 5 port Switch are designed to allow simultaneous transmission of
multiple packets via an internal high-speed data channel. This means
that it can partition a network more efficiently than bridges or
routers in most environments. This 5 port Switch is a highly reliable
network Switch and is the ideal device for bridging Ethernet to Fast
Ethernet workgroups or networks. Simple and cost-effective, the 5 port
Switch supports IEEE802.3 10Base-TX Ethernet and IEEE802.3u 100Base-TX
Fast Ethernet. The 5 port Switch is therefore fast being recognized as
one of the most important building blocks for today networking technology.
Specification:
Model Number ESW-1005A
Standard IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
Network Media 100Base-TX - UTP/STP category 5 cable
10Base-TX - UTP/STP category 3 or 5 cable
Connector Shield RJ-45 port for 10/100Mbps TX
LED indicators System - Power LED
Individual port - link/activity LEDs
Dimension 159 (L) x 100 (W) x 28 (H) mm
Temperature Operating 0 - 50C
Storage -20 - 70C
Humidity Operating 10 - 90%
Storage 5 - 95%
Device Input Power 9 VDC
Registrations FCC Part 15 Class A, CE
|
