|
document references:
features:
- 100BASE-TX Fast Ethernet PCI Bus
- Fully comply with IEEE 802.3u / IEEE 802.3
- Full-Duplex up to 200Mbps throughput
- automatic Optimal line-speed set
- Shielded RJ-45 connector
- PCI specification 2.1, 2.2
- ACPI and PCI Bus Power Management
- Boot ROM supported
introduction:
The Fast Ethernet PCI Adapter is an exciting new 10/100 Mbps
dual speed Fast Ethernet Adapter. This model is equipped with
an Auto-Negotiation function and will smoothly and
automatically switches drivers between 10/100Mbps, Full or
Half-Duplex LAN connection. The Adapter runs in 32-bit bus
master mode. The 10/100 Fast Ethernet PCI Adatpter with
drivers for all major operating systems.
Specification:
Model Number
LNA-100W
Standard
IEEE 802.3u: 100BASE-TX
IEEE 802.3: 10BASE-T
Bus Type
PCI-Bus specification revision 2.1, 2.2
Network Interface
One (1) shielded RJ-45 phone-type jack
Network Modes Supported
100BASE-TX (Category 5 TP cable required)
10BASE-T (Category 3, 4, and 5 TP required)
Full-Duplex available in both modes
LED Indicators
SPEED (Green)LINK/ACT (Green)
Environment
Operating Temperature: 0 - 55C
Storage Temperature: -20 - 70C
Humidity: 10 -90 %(Non -Condensing)
Dimensions
119.74 x 51.5mm (4.71 x 2.03 inches)
|
