|
document references:
features:
- IP Routing-RIPv2 (backward compatible with RIPv1)
- DHCP (Dynamic Host Configuration Protocol)
- NAPT (Network Address and Port Translation)
- NAT (Network Address Translation)
- ICMP (Internet Control Message Protocol)
- Simultaneous Ethernet and USB operation
- IGMP (Internet Group Management Protocol)
- Static IP routing
- SNMP
introduction:
With the ASR-8100 / ASR-8400 ADSL Router, speeding up for your
network has never been easier or more cost-effective. Offering
connectivity many times faster than traditional dial-up modems.
At up to 8Mbps downstream and 640Kbps upstream for full-rate
G.dmt, and up to 1.5Mbps downstream and 512Kbps upstream for
G.lite, you'll see a startling and immediate increase in performance.
Specification:
Model Name ASR-8100 / ASR-8400
LAN Port ASR-8100 (1 port)
ASR-8400 (4 port)
Chipset CX82310-14 ARM940T Processor
Line Connection RJ-11(2 wires), USB, RJ-45
Compliant Full-rate ANSI T1.413 Issue 2
ITU G.dmt (G.992.1) standards
Splitter less ITU G.lite (G.992.2)
Full-rate Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
G.lite adaptive Maximum downstream rate of 1.5 Mbps
Maximum upstream rate of 512 Kbps
WAN Mode Support PPP over ATM (RFC 2364)PPP over Ethernet (RFC 2516)
LAN Mode Support Bridged/routed Ethernet over ATM (RFC 2684/1483)
Classical IP over ATM (RFC 1577)
PPP over Ethernet (RFC 2516)
Bridge Mode Support Ethernet to ADSL self-learning Transparent Bridging
(IEEE 802.1D)
Supports up to 128 MAC learning addresses
Router Mode Support IP routing-RIPv2
(backward compatible with RIPv1)
Static routingDHCP
(Dynamic Host Configuration Protocol)
Server and Client NAPT
(Network Address and Port Translation)
NAT
(Network Address Translation)
ICMP
(Internet Control Message Protocol)
Simultaneous USB and Ethernet operationIGMP
(Internet Group Management Protocol)
Ethernet Compatible with IEEE 802.3 standard
10/100 Mbps auto selection
USB host Interface USB Revision 1.1
PTT and Safety FCC Part 15/Part 68, CE,UL
OS WIN 98SE ; WIN 2000¡FWIN ME¡FWIN XP
System Requirement PII-266 + 32M RAM
Power External AC adapter
Input : 90-120V or 200-240V, 50/60Hz
Output : 12VAC/800mA
LED Indication Power, Ready, Showtime, TXD/RXD, Activity, Link
SIZE 160 x 120mm
Weight 300g
Software Upgrade Upgrade by USB port
|
