|
document references:
features:
- IP Routing-RIPv2
- Dynamic Host Configuration Protocol
- Network Address and Port Translation
- Network Address Translation
- Internet Control Message protocol
- Simultaneous Ethernet and USB operation
- Static IP routing
- SNMP walk management support
introduction:
Specification:
Model Name ASR-8000
Chip Set Conexant
Line Connection RJ-11(2 wires), USB, RJ-45
Full-rate adaptive Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
G.lite adaptive Maximum downstream rate of 1 Mbps
Maximum upstream rate of 512 Kbps
WAN Mode Support PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
LAN Mode Support Bridged/routed Ethernet over ATM (RFC 2684/1483)
Classical IP over ATM (RFC 1577)
PPP over Ethernet (RFC 2516)
Bridge Mode Support Ethernet to ADSL self-learning
Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses
Router Mode Support IP routing-RIPv2 (backward compatible with RIPv1)
Static routing DHCP
(Dynamic Host Configuration Protocol)
Server and Client NAPT
(Network Address and Port Translation)
NAT
(Network Address Translation)
ICMP
(Internet Control Message Protocol)
Simultaneous USB and Ethernet operation IGMP
(Internet Group Management Protoco l)
Ethernet Interface Compatible with IEEE 802.3
standard 10/100 Mbps auto selection
USB host Interface Compliant with USB Revision 1.1
PTT and Safety FCC Part 15/Part 68,
CE,CB,UL,LVD,C-TICK
OS support Windows 98SE/2000/ME/XP
System Requirement PII-266 + 32M RAM
Power External AC adapter
Input : 90-120V or 200-240V ,50/60Hz
Output : 9VAC/800mA
LED Indication Power , Status, Ethernet Link /Act,ADSL Link /Act,
SIZE 120 x 100mm
Weight 300g
Software Upgrade by USB port
|
